- 809 METAL PIPE AND FITTINGS 809.01 DUCTILE IRON PIPE AND FITTINGS
Shop applied double protective coating system for bossed outlets shall be: form an epoxy fillet over the weld and provide a smooth transition between boss and parent pipe; and (2) Koppers' Petropoxy (asphalt epoxy) or equivalent coating approximately ten.
- Tony's annual checklist
X Running Lights X Prop Bolts & Safety Wire X Prop Alignment & Condition X Oil Change X X Safety Drain Plug X X Check Fabric Cracks, etc... Weather The balloon must not be flown in meteorological conditions which give rise to erratic winds and gusts.
- SERVICE BULLETIN
Remove the two nuts securing the engine harness clamps and cover plate to the cylinder block port located behind and to the right of the 7... All evolutions must be completed during the training period unless conditions do not permit.
- INSTALLATION INSTRUCTIONS
If you add or replace refrigerant oil in the system, use only this PAG oil: Route and secure the lines and hoses properly; maintain clearance between them and surrounding parts... All evolutions must be completed during the training period unless.
- INSTALLATION INSTRUCTIONS
If you add or replace refrigerant oil to the system, use only Route and secure the lines and hoses properly; maintain clearance between them and surrounding parts... All evolutions must be completed during the training period unless conditions do not.
|
